Ketron® HPV PEEK (Bearing Grade) Ketron® HPV PEEK (black) is a "bearing grade" Ketron PEEK advanced engineering plastic material based on pure PEEK and modified with carbon fiber, PTFE and graphite. Ketron® HPV PEEK has a low coefficient of friction, good wear resistance, and high pressure-velocity capability, making it ideal for wear-prone applications, prolonging component life and improving performance.
The difference between PC board and PVC board The biggest difference between PC boards and PVC boards is the base material. The main base material of PC board is polycarbonate, while the base material of PVC board is polyvinyl chloride, so the characteristics brought about are also different. The density of PC board is lower than that of PVC board, the continuous use temperature is higher than that of PVC board, the light transmission performance is better than PVC board, and the visible light...
0.15mm Transparent fr4 g10 epoxy fiberglass laminated sheet FR - 4 Product Features: The flame retardant grade is UL94 V0 F grade Heat resistance and heat resistance (120 min) reaches to 180 ℃ High mechanical performances (bending, compression and stretching of transverse strength is above 330Mpa) High dielectric properties of th e oil (25 ℃ in the vertical dielectric strength of 16 kv/mm) We can press, cut and process the sheet according to customer's requirements and provide insulation...
About PC-300™ Transparent Clear Polycarbonate Anti Static Sheet PC-300 Polycarbonate sheet is designed to control static electricity. It is a high quality polycarboante material which has been surfaced with SciCron Technologies proprietary clear C-300 static dissipative surfacing. This unique coating technology prevents charge generation on the plastic sheet surface thereby controlling particulate attraction and preventing electrostatic discharge events (ESD events). PC-300 is UL94-V2 rated at...
Can PC replace glass products in automotive trims ? Polycarbonate sheet, referred to as PC, has good impact resistance, thermal distortion resistance, and good weather resistance, so it is suitable for the production of various parts of cars and light trucks, mainly in lighting systems, instrument panels, heating panels , defroster and polycarbonate alloy bumper, etc. According to data from developed countries, PCs are used in 40% to 50% of the electronics and automobile manufacturing...
Application of FR4 epoxy insulating glass fiber board The insulation board is a composite material produced by combining glass fiber cloth and epoxy resin. This material has very good insulation performance, ultra-high hardness, excellent corrosion resistance and ultra-high flame retardancy. It has been widely used in many occasions. What fields will the insulation board be used for? The common insulating board mainly uses its own "insulation" performance to be applied in some electrical...
Four common epoxy board processing methods Combining glass fiber cloth with resin, epoxy boards manufactured through production are boards. If you want to make various shapes, you need to process the epoxy board. Common epoxy board processing methods are as follows: 1. Lathe milling machine processing Use lathe milling machine to process epoxy board, generally it is to process plane and groove, and it can also process various curved surfaces and gears. For very thick epoxy boards, the industry...
Difference between GPO3 and FR4 GPO3 and FR4 are both materials used in the production of electrical components. GPO3 is a thermoset laminate material, while FR4 is a type of glass-reinforced epoxy laminate material. GPO3 is more rigid and has a higher dielectric strength than FR4, making it ideal for components that require a high level of electrical insulation. FR4, on the other hand, is more flexible and has better thermal properties than GPO3, making it better suited for components that...
During World War II, the telescopes used by the German army were of the highest specification. The telescope barrels were made of metal and vulcanized skin. The metal structure ensured the firmness of the telescope, and the vulcanized skin was shock-absorbing, waterproof, and constant temperature, so that the optical axis of the telescope would not change. Most modern telescopes are made of metal instead of plastic. Ordinary plastic is highly brittle, not strong, very light in weight, not...
Bakelite is made of insulating impregnated paper impregnated with phenolic resin, baked and hot pressed. This product is suitable for insulating structural components in motors and electrical equipment with high mechanical performance requirements, and can also be used in transformer oil. Good mechanical strength, suitable for backing boards for drilling in PCB industry, distribution boxes, fixture boards, mold splints, high and low voltage wiring boxes, packaging machines, combs, etc. Suitable...
Hony Plastic provide Extreme Materials (>220°C) Material Grades that are subjected to Extreme Temperature or are required to perform in highly technical environments. PI, PAI, PBI. Vespel®, Duratron®, Semitron ®
The application of anti-static board The more common anti-static boards on the market are only anti-static on the surface. Through coating (Coating) technology, a layer of anti-static hard film (very thin, micron level) is formed on the surface of plexiglass (PMMA), PVC, PC and other boards. 1 mm mm=1000 microns), the anti-static layer can only be removed by mechanical processing, and it will not be affected by wiping with alcohol chemical solvents. This process perfectly retains the inherent...
Sampling inspection is the final threshold for the inspection of workpieces. It is necessary to measure the specific dimensions of the slit width, flatness and verticality of the workpiece to determine whether the processing quality can meet the secondary processing requirements. Traditional flame cutting is operationally controlled by the use of compensation, and the quality of the cutting is highly variable due to the operator's experience. The CNC flame cutting machine integrated with the...
Engineering Plastic Pps Plate Sheet Rod Machined parts and PPS injection molding is a white, highly crystalline, hard and brittle polymer. In addition, pps has the following performance characteristics, as follows: 1. General performance ① Very little water absorption ② Good flame retardancy 2. Warm blood performance It can withstand 260 ℃ in the short term, and can be used for a long time at 200~240 ℃. 3. Mechanical properties ① High rigidity ② Good creep resistance ③ High wear resistance ④...
Polyamide (PA, Nylon) Structural formula [NH(CH2)m NHCO(CH2)n-2CO] Properties Crystalline thermoplastic plastic with obvious melting point. Nylon6 Tm is 220~230℃, Nylon66 is 260~270℃. Nylon itself has a water-absorbing base so it is water-absorbent. It must be dried before forming. If the temperature is too high, the nylon particles will change color. Advantages 1. High tensile strength 2. Excellent toughness and impact resistance 3. Self-lubricating, good abrasion resistance, and good chemical...
Mostly used in sliders, pads, pads and the like. The main advantages are: (1) High strength, able to bear the load for a long time; (2) Good resilience, able to bend without deformation, while maintaining toughness and resisting repeated impacts; (3) Wear-resistant and self-lubricating, it provides better working performance than bronze cast iron carbon steel and phenolic laminate in oil-free (or de-oiled) lubrication applications, reducing consumption and saving energy; (4) Noise...
Nylon rod use: Nylon rods have good toughness, strong wear resistance, oil resistance, shock resistance, good tensile strength, good bending strength, low water absorption, good dimensional stability, etc., so they are used to process various wear-resistant high-strength parts. The product has a wide range of uses. It is a good material that replaces steel, iron, copper and other metals with plastic, and is an important engineering plastic; cast nylon widely replaces wear-resistant parts of...
What material is M/C NYLON ? NYLON is MCPA cast nylon, also called cast nylon, It is similar to the process of copper and iron casting. It can directly inject raw materials into the preheated mold to quickly polymerize and solidify to make MCPA cast nylon. It is a new type of engineering plastic, and the material is a kind of High strength. Good rigidity, low density, abrasion resistance, friction reduction, oil resistance, corrosion resistance, easy processing and molding, moderate price...
There are many kinds of antistatic agents, such as anionic, cationic, polymer and composite. According to different physical properties and materials, different antistatic agents need to be selected, some can be used universally, and some cannot be used universally. Anion and cation type are cheap, easy to precipitate, frost, white spray, adhesion, etc. The polymer type has good effect and high price, but it is not easy to precipitate, no frost, no white spray, no adhesion. The effect is...
According to Japanese media reports, Asahi Organics Industries plans to develop a carbon fiber reinforced sheet molding compound (SMC) business in the field of electric vehicles (EVs). It is reported that Asahi Organics Industry is discussing with a number of large-scale automobile manufacturers to use it as a component for absorbing radio waves. Because this product makes full use of the conductive properties of carbon fiber, it can also act as an electromagnetic wave shielding material and...
HONY®Bakelite products are the first choice for many plastic products due to their low price of raw materials and excellent product characteristics. The price of raw materials for Bakelite products is nearly 50% of the price of ABS. Although bakelite products need to be heated for molding, the processing time is longer than ordinary plastics, and the mold wears more and requires higher steel, but because of its advantage in the price of raw materials, it is still the first choice for many...
The main difference is the size of the resistor: Resistance greater than 10 to the 12th power ohm is insulation Resistance greater than 10 to the 6th power and less than 10 to the 12th power is anti-static Static electricity: Static electricity is an objective natural phenomenon, produced in many ways, such as contact, friction, peeling, etc. Electrostatic protection technology, such as the electronic industry, semiconductor, petroleum industry, weapon industry, textile industry, rubber...
What is the difference between epoxy resin board and bakelite board The epoxy resin board has higher strength, and the bakelite board is made of phenolic resin and filled with better heat resistance. First, the material is different. The epoxy resin board is reinforced with glass fiber cloth, and the bakelite board is made of wood pulp paper; the second is that the physical properties of the board are different. For example, the hardness of the epoxy resin board is larger than that of the...
Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties. Paper bakelite is the most common laminate, and it is also the most widely used and most used industrial laminate in the world. Main features: Good mechanical strength, anti-static, intermediate electrical insulation, made of insulating impregnated paper impregnated with phenolic resin, baked and hot...
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.